 |
 |
| Pool & Spa Hose | Irrigation Hose |
 |
 |
| Pond/Waterscape Hose | Non Reinforced PVC Tubing |
 |
 |
| Non Metallic Conduit | Industrial Hose |
 |
 |
| Jetted Bath Tubing | Non Metallic Fittings |
 |
 |
| Marine Hose | VarGrip Spa Hose |
 |
 |
| NSF Certification | IAPMO Certification |
Download pdf
Non Metallic Fittings
Applications
- For use on Spas, Hot Tubs, Swimming Pools &
Waterscapes - Above and below ground installations
- In compliance with IAPMO PS 33-2000a
- IAPMO listed file No. USPC-SP 4729
- NSF-50 listed all sizes
- FDA Non-toxic formulation in compliance with IAPMO TSC 31-90
- Use with listed PVC solvent cements and primers
- For use with PVC Schedule 40 type fittings
- Manufactured from high quality virgin PVC compound
- Flexible PVC wall and cover for ease of use
- A true Schedule 40 Rigid PVC spiral resists crushing & impact
- Fewer fittings required compared with PVC pipe
- Outside diameter tolerance +/- 0.006"
- Attractive White or Black color
- Open end applications downstream of valve
- Warranty against material defect and workmanship
- All PSI and vacuum
Note:
Use with recommended primers and PVC cements; consult with glue supplier for recommendations. Coils of VarTek Spa Hose should not be stacked more than five coils high after receipt of shipment. Hose which has been stacked high may be damaged over time.
Benefits:
- VarTek's Spa Hose is specially designed for use in the installation of
tubs, spas, swimming pools, filters, and similar water transfer
applications. Designed to be glued into Schedule 40 PVC fittings. - Very Flexible—Ideal for working in confined areas. Permits
installer to make smooth, tight turns. Saves time and labor. - Cost-saving—Requires fewer fittings than rigid pipe when
plumbing a normal spa or hot tub installation. - Smooth bore construction allows unrestricted flow.
Specifications and Packaging
| CUSTOMER ITEM# | SPEC. | UNIT WEIGHT (LB) | NUMBER OF OUTER CARTON | Outside Diameter (mm) | A(in.) | B(in.) | C(in.) |
| NMLT 180-38 | 3/8" | 0.013 | 100 |  |
1.44 | 2.03 | n/a |
| NMLT 180-50 | 1/2" | 0.012 | 100 | 1.44 | 2.15 | n/a | |
| NMLT 180-75 | 3/4" | 0.017 | 100 | 1.71 | 2.19 | n/a | |
| NMLT 180-100 | 1" | 0.024 | 50 | 2.01 | 2.22 | n/a | |
| NMLT 180-125 | 1 ¼" | 0.035 | 50 | 2.36 | 2.44 | n/a | |
| NMLT 180-150 | 1 ½" | 0.048 | 50 | 2.68 | 2.68 | n/a | |
| NMLT 180-200 | 2" | 0.077 | 20 | 3.31 | 2.97 | n/a | |
| NMLT 90-38 | 3/8" | 0.021 | 100 |  |
3.07 | 1.46 | 2.05 |
| NMLT 90-50 | 1/2" | 0.013 | 100 | 3.07 | 1.46 | 2.05 | |
| NMLT 90-75 | 3/4" | 0.019 | 100 | 3.50 | 1.69 | 2.44 | |
| NMLT 90-100 | 1" | 0.029 | 50 | 4.11 | 1.99 | 2.83 | |
| NMLT 90-125 | 1 ¼" | 0.050 | 20 | 4.72 | 2.36 | 4.13 | |
| NMLT 90-150 | 1 ½" | 0.062 | 20 | 5.02 | 2.68 | 4.33 | |
| NMLT 90-200 | 2" | 0.108 | 10 | 5.91 | 3.31 | 5.04 |