 |
 |
| Pool & Spa Hose | Irrigation Hose |
 |
 |
| Pond/Waterscape Hose | Non Reinforced PVC Tubing |
 |
 |
| Non Metallic Conduit | Industrial Hose |
 |
 |
| Jetted Bath Tubing | Non Metallic Fittings |
 |
 |
| Marine Hose | VarGrip Spa Hose |
 |
 |
| NSF Certification | IAPMO Certification |
Download pdf
Non Metallic Conduit
Applications
- For the installation and protection of electrical conductors in
circuits of 600 volts nominal, or less
- Motor circuits—for conductors of motor feeders, branch and control
circuits - Where the conditions on installation, operation, or maintenance
require flexibility or protection from liquids, vapors, solids, or
weather - Agricultural buildings per NEC 547.5.
- Used in industrial and commercial applications for conveyors,
blowers, cranes, air conditioners, machine tooling and lubrication
equipment - Exposed or concealed installations
- Applications requiring movement, crossover connections, or tight
bends - For direct burial and encased in concrete
- For flexible connections to swimming pool, spa, and hot tub motors
per NEC 680.21(A)(3) & 680.42(A)(1)
blowers, cranes, air conditioners, machine tooling and lubrication
equipment - Electrical signs and outline lighting supply and secondary-circuit
conductors per NEC 600.7, 600.31 (1000 volts or less) & 600.32
(over 1000 volts) - A protective combination of thermoplastic materials formed into a
conduit/raceway which seals out water, liquids, abrasives, alcohol,
coolants, corrosive fumes and gases, dirt, grease, mineral acids,
non-concentrated fixed alkaline, petroleum oils, salt air and spray,
and weather - Smooth PVC interior for easy wiring pulling
- UV sunlight resistant jacket
- Rated for temperature range of -30°C to 80°C, 60°C Oil (-22 to
+176, 140°F Oil) - Accepts standard Liquid tight fittings for use with LFNC-B
- NEC Type designation—Type LFNC-B (Liquid tight Flexible
Nonmetallic Conduit) - ANSI/NFPA-70, NEC Article 356
- UL Listed to Underwriters Laboratories Standard UL 1660
- Approved by Canadian Standards Association
- Hazardous Locations - where necessary for flexible connections
within hazardous locations per the following:
- Class 1, Div. 2 - 2005 NEC 501.10(B)(2) - Floating building feeders and services per NEC 553.7
- Boatyards and Marinas in accordance with NEC 555.13
- Cranes and Hoists in accordance with NEC 610.11(C)
- For Elevator, Dumbwaiters, Escalators, Moving Walks, Wheel Chair
Lifts and Stairway Chair Lifts in accordance with NEC 620.21 (where
expressly permitted) - Under raised floors in information technology equipment
conductors' and cables in accordance with NEC 645.5(D) &
645.5(D)(2) - Service entrance in lengths up to six feet per NEC 230.43(15)
- For containment of 600 Volt and lower potential circuits
- Approved for use in lengths longer than 6 feet per NEC 356.10(5)
- Motor leads per NEC 430.145(B)
- Class 2, Div. 1 - 2005 NEC 502.10(A)(2)
- Class 2, Div. 2 - 2005 NEC 502.10(B)(2)
- Class 3, Div. 1 - 2005 NEC 503.10(A)(2)
- Class 3, Div. 2 - 2005 NEC 503.10(B)
VARTEK Type NM is manufactured with a spiral of rigid PVC
reinforcement imbedded within a flexible PVC wall. The construction
provides excellent impact and crush strength while remaining highly
flexible. The conduit resists oils, mild acids and exposure to sunlight
| Part Number | Trade Size (Inches) |
Aprocimate Weight (lbs/100 ft) |
Inner Diameter Min./Max. (Inches) |
OuterDiameter Min./Max. (Inches) |
Approx. Bend Radius (Inches) |
Standard Coil Length. (feet) |
Standard Reel Length. (feet) |
| NMC038 | 3/8 | 10.5 | 0.484/0.504 | 0.690/0.710 | 4 | 100 | 600 |
| NMC050 | 1/2 | 13 | 0.622/0.642 | 0.820/0.840 | 4 | 100 | 1500 |
| NMC075 | 3/4 | 18 | 0.820/0.840 | 1.030/1.050 | 5 | 100 | 1000 |
| NMC100 | 1 | 27 | 1.041/1.066 | 1.290/1.315 | 6 | 100 | 400 |
| NMC125 | 1 1/4 | 34 | 1.380/1.410 | 1.630/1.660 | 8 | 50 | 250 |
| NMC150 | 1 1/2 | 45 | 1.575/1.600 | 1.865/1.900 | 10 | 50 | 150 |
| NMC200 | 1 1/2 | 64 | 2.020/2.045 | 2.340/2.375 | 12 | 50 | 100 |